Tuya Smart Wifi Motor Switch Relay for Alexa Google Home

Description

Type 1,type 2.type 3,type 4 is wifi relay
Type 5 is RF433 remote controller.

4 Channel Dry Contact Wifi Relay(Three Working Modes)

Use for

1.Remotely give a pulse signal to turn on or turn off Lights,Lamps.computer and other home appliance.
2.Remotely give a pulse signal to turn on or turn off Garage Door,Door Access,Electric Motor Lock,Sliding Door.
3.Remotely give a pulse signal to control DC Motor,AC Motor to Forward and Reverse.

The RF433 remote controller don’t include battery
battery type;27A 12V.
The picture of the battery is in the end of the page.

The WIFI module can be controlled by fixed code EV1527 RF433 remote controller,and it can’t be controlled by RF433 rolling code remote controller.

Note

The relays is passive output(dry contact), No matter how many power you supply in the input, the output don’t have any voltage, you also need to supply power in output.
The power supply in the input just can make PCB board work.
If you do not supply power in output, the connectted device can’t work.

3 Working Modes

1.Self-locking mode :
Each channel could be switched on/off seperately.You can turn on/turn off all channel at the same time.

2.Interlocking mode :
Switch on any channel , other channels will be switched off automatically .

3.Inching mode (jog mode):
Switch on one channel,the channel will be automatically closed after 0.5 seconds .Other channel is same as the channel.

If you need to change the mode,you need to press the mode button or active the working mode in the app.

How to Change the Inching Time

If you need to change the inching time.you need to press the mode button to enter into self-locking mode or interlocking mode,so you can change the inching time on the APP and the inching time only available in the self-locking or interlocking mode)
The time range is 0.5-3600 seconds.

Features:

【Two Input Ports】
You could choose Micro USB 5V port or the DC/AC7-32V screw terminal port to supply power in the input to make the pcb board board work.
【Dry Contact/Passive Output】
No matter the power source you supply in the input, the output don’t have any voltage
If you do not supply power source in output port, the connectted home appliance can’t work, you also need to supply power source in output.
【Timer】
The connectted home appliances can be automatically turned on/off according to the time schedule.
Each channel can set different time schedule.

Different Ways to Control the WIFI Module

【APP Remote Control】
You can control the connectted home appliance in Tuya or smart life APP anywhere and anytime.Such as light, electric kettle, electric rice cooker, electric curtain, etc.
【RF433 Control】
The WIFI Module support RF433 Frequency,and you can control the WIFI module by RF433mhz remote controller.
【Mobile Phone Control】
When you go outside or at home,you could control the device in your smart phone by 2G/3G/4G Mobile Network or WIFI.
(Note:The router need to online.The WIFI module need to keep a close distance with the router and the wifi module need to online in Tuya Smart Life APP)
【Voice Control 】
Compatible with Alexa and Google Assistant, you can use the voice control to turn on/off the connectted home appliances .
【Share Control】
One device can control by Multiple phones,you can share the wifi module with your family.
【Group Control】
one phone can control Multiple smart device.You can add the wifi module and other smart device in a group,and then you can turn on/off all smart device at the same time.

Description:

Input 1: Micro USB 5V Port
Input 2:(screw terminal port): DC/AC 7-32V
NC NO COM Output:Passive Output(Dry contact)
Working frequency: 50-60Hz
RF433 Frequency
Working temperature: -20-70℃
Wifi standards/ protocol :IEEE 802.11b/g/n, WIFI 2.4Ghz
Max load : 16A/3500W/4 Channel
Max current:`10A/2000W/Channel
Size: 757320 mm

Case(Shell) Included

Type 3 and type 4 include shell(case),and in the back of the case,also it have Groove for mounting din rail.

Wiring Diagram for Light/Lamp

Wiring Diagram for RF433 Remote Controller

Wiring Diagram for AC/DC Motor

Only one motor can run each time.
So if you connect two motor at the same time,you need to set the interlocking mode

For AC Motor

For Garage Door

For AC Contactor

Wiring Diagram for Electric Motor Lock

The Electric Motor Lock must have K-, K+, GND, +12V ports.
2. K+ must be connected to the 12V port

Wiring Diagram for Door Access Control

APP Remote Control

You can remote turn on/off household appliances and set timing schedules to turn on/off the household appliances via app Tuya/Smart life anywhere anytime.
such as lights, celectric curtains ,electric curtains fans. so you can enjoy an high-tech life.

Timer schedule

Via app,you can set time schedules to automatic turn on/off the household appliances , such as lights, celectric curtains ,electric curtains fans. so you can enjoy an high-tech life.

How to pair RF433 remote controller with with the devices.

1.Press the RF433 pairing button for 4 seconds,and wait until the blue led indicator turn on.

2.press any key of RF433 remote controller, and then you can pair the channel with one key of RF433 remote controller successfully
If you need to pair other key of the RF433 Remote controller and other channel, you need to repeat the step.

How to clear the pairing RF433 remote controller with with the devices.

1.Press the RF433 pairing button for 15 seconds,and wait until the blue led indicator turn off.
If you need to clear the pairing between other key of the RF433 Remote controller and other channel, you need to repeat the step.

Product Detail

Battery of RF433 Remote Controller

27A 12V