Description
Photon Mono Unboxing
Specifications:
System : ANYCUBIC Photon Mono
Operation : 2.8 inch Touch Screen
Software : ANYCUBIC Photon workshop
Connectivity : USB
Technology: LCD-based SLA
Light-source: high-quality filament（wavelength 405nm）
XY Res.: 0.051mm 2560*1620（2K）
Z Axis Res.: 0.01mm
Layer Res.: 0.01 ~ 0.15mm
Printing Speed: MAX 50mm/h
Rated Power: 45W
Physical Dimensions
Printer Size : 227mm(L)222mm(W)383.6mm(H)
Build Volume: 130mm(L）82mm(W）165mm（H）
Material: 405nm UV Resin
Net Weight: ~4.3kg
Gross Weight: ~6.5kg
Package Size: 295mm295mm530mm
6” 2K Monochrome LCD
Fast printing: With a monochrome screen, the printer can use less energy while printing faster.
The exposure time is reduced to 1.5 seconds.
A much longer lifespan: You can print up to 2000 hours with it, which is 4 times longer than color LCD.
More creative space:
The printing space of Photon Mono 3D is 130 mm (L) * 80 mm (W) * 165 mm (H), which is much larger than a normal LCD printer. You have enough space to express your creativity freely.
Improved stability
The Photon Mono 3D printer uses the Z-axis guide rail structure and screw motor, which makes the 3D printer more stable and eliminates the layer line.
UV-blocking Top Cover
With the transparent cover, you can watch your prints while still blocking 99.95% of the UV light.
New Matrix Parallel Light Source
It has a more uniform exposure, higher efficiency and better heat dissipation.
Anycubic Slicer Software
New features are added to the software. Supports up to 16x anti-aliasing.
– Fast slicing
– Hollowing
-Model cutting
– Lettering
Quick FEP Replacement
Easy and quick to replace the FEP.
Top Cover Detection
The printer can be set to stop printing immediately after opening the cover.
High Quality Power Supply
UL certification, CE marking, and ETL certification
m***t –
color: -photon mono Ships From: United States
P***v –
Relatively quickly came., packed perfectly. The program on the flash drive does not allow you to immediately throw the model on the flash drive and only through saving on the computer. The screen is small and low to be but it’s more about ease of use. The set is full, all you need to eat. Prints well. When turned on the network, the socket is a spark-it’s a minus
color: -photon mono Ships From: Russian Federation
I***s –
color: -photon mono add 2L Ships From: Russian Federation
V***v –
color: -photon mono Ships From: Russian Federation
V***v –
The parcel came in 10 days to Ukraine. And then a long quest for 30 days on registration at customs, payment of tax and here he is handsome.
The first seal is not from the flash drive. I decided to adjust the model myself. Feelings are dual. It seems fast, class, but there is not enough experience.
But the device is cool! Take it will not regret it.
I took it with a big discount, I’m happy as an elephant.
color: -photon mono Ships From: China
V***n –
Came in time and whole.
When printing the test model-the part went, plus when cleaning the leg fell off.
On the edges of the bottom of the bath there were thin films of polymer resin-I hope this is one-time.
The same was true of the bottom of one of the models.
color: -photon mono Ships From: Russian Federation
A***v –
The seller sent quickly. Brought the printer itself and two jars of resin with different parcels. Brought TC KCE in a couple of days. When unpacking, I found that the Z axis has a noticeable backlash. I had to remove the bottom cover and tighten the bolts. The resin smells great (it’s not an option to print at home). Order not smelly. On the flash drive in the kit flash drive with the actual firmware. Prints well. Printing is very different from FDM printers, very much dirt and requires washing with alcohol. Later I will add a review.
color: -photon mono add 2L Ships From: Russian Federation
E***v –
It came quickly, it works, but here’s the native slicer that goes in the kit jambs, so I had to use another.
color: -photon mono add 2L Ships From: Russian Federation
M***v –
Good stuff. The truth with the resin of another manufacturer did not work out the test model. But nemesis printed perfectly from the first attempt. Resin used the brand Gorky liquid-I advise. There are jambs with wash & cure machine: the yellow cap has to move slightly to bake the model. In an ideal position, the sensor does not see a sticker. And also, sometimes it stops spinning a plate for baking, but it’s treated if you twist your hand. Like not deadly jambs. A small print area (76x120mm approximately), but to get acquainted with 3D printing is just a wonderful device. The absence of a screw does not seem to affect the printing, negotiations with the seller are ongoing.
color: -add ws 2.0 Ships From: Russian Federation